[cvsnt] Re: CVSNT SSL problem - FIXED

[Sascha Konrad]

I ran genkey in the CVSNT folder and used the generated file as the 
certificate. Now it seem to work again.

-- Sascha

Sascha Konrad wrote:
> Ok,
> 
> There seems to have been a problem with my event log on my side. New 
> events did not show up, but now after I cleared the log it works again.
> 
> Ok, now I get the cvsnt messages in my event log. When the SSL connect 
> fails, then I get the following two events in this order:
> 
> Couldn't read certificate (0): error:0906D06C:PEM 
> routines:PEM_read_bio:no start line
> 
> SSL connection failed (-1): error:00000000:lib(0):func(0):reason(0)
> 
> I guess that means something is wrong with my certificate. I checked in 
> my CVSNT settings, the SSL certificate file and private key file both 
> point to the file ca.pem in my CVSNT folder. Permission are set to 
> everyone, full control.
> 
> -- Sascha
> 
> Tony Hoyle wrote:
> 
>> Sascha Konrad wrote:
>>
>>> There is nothing in the XP event viewer at all from cvsnt, or do you 
>>> mean a different event log? Is there no option to make CVSNT write 
>>> log information into a file?
>>
>>
>>
>> That probably means it's not connecting to the server at all.  You'll 
>> have at least server startup messages/shutdown messages there though.
>>
>> Do the other protocols work?
>>
>> Tony
>> _______________________________________________
>> cvsnt mailing list
>> cvsnt at cvsnt.org
>> http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt
> 
> 

-- 
-------------------------------------
"Good judgement comes from experience
Experience comes from bad judgement"

Sascha Konrad
4924 Belle Chase Blvd #301
Lansing, MI 48910
USA
Cell Phone:  1-517-974-9399
Work Phone:  1-517-353-4638
Email: konradsa at cse.msu.edu
http://www.cse.msu.edu/~konradsa