[cvsnt] Building CVSNT on RHEL5 64bit

[Arthur Barrett]

Nitzan,

You'd be better off asking on cvsnt-dev.

To make the latest 2.5.03 use the tag/branch CVSNT_BRANCH_2_5_03_2382.
Note: we do not currently build RH5 or RHn 64 bit so you'll have some
porting work to do, though the sles9 port is 64 bit and may help you.

But please move this discussion to cvsnt-dev, that's where it belongs.

Regards,


Arthur Barrett

> -----Original Message-----
> From: cvsnt-bounces at cvsnt.org 
> [mailto:cvsnt-bounces at cvsnt.org] On Behalf Of Nitzan Shaked
> Sent: Thursday, 11 October 2007 1:02 AM
> To: cvsnt at cvsnt.org
> Subject: [cvsnt] Building CVSNT on RHEL5 64bit
> 
> 
> Hi list
> 
> after running ./configure (even with --enable-64bit, and even with
> --disable-64bit) and then running make, I get the following:
>  
> ...
> make[3]: Entering directory `/root/new/cvsnt-2.5.03.2382/cvsapi'
> ...
> /bin/sh ../libtool --mode=link g++  -g -O2    -o libcvsapi.la -rpath
> /usr/local/lib -release 2.5.03.2382 -L//usr/local/lib Codepage.lo
> cvs_string.lo DiffBase.lo StringDiff.lo GetOptions.lo 
> md5calc.lo mdns.lo
> rpcBase.lo ServerIO.lo SqlConnection.lo SqlRecordset.lo SqlVariant.lo
> TagDate.lo TokenLine.lo XmlApi.lo Zeroconf.lo fncmp.lo fnmatch.lo
> getdate.lo getmode.lo md5.lo timegm.lo DirectoryAccess.lo DnsApi.lo
> FileAccess.lo HttpSocket.lo LibraryAccess.lo RunFile.lo SocketIO.lo
> SSPIHandler.lo -lexpat   ../mdnsclient/libmdnsclient.la
> ../libltdl/libltdlc.la  -lcrypt 
> g++ -shared -nostdlib
> /usr/lib/gcc/x86_64-redhat-linux/4.1.1/../../../../lib64/crti.o
> /usr/lib/gcc/x86_64-redhat-linux/4.1.1/crtbeginS.o  .libs/Codepage.o
> .libs/cvs_string.o .libs/DiffBase.o .libs/StringDiff.o
> .libs/GetOptions.o .libs/md5calc.o .libs/mdns.o .libs/rpcBase.o
> .libs/ServerIO.o .libs/SqlConnection.o .libs/SqlRecordset.o
> .libs/SqlVariant.o .libs/TagDate.o .libs/TokenLine.o .libs/XmlApi.o
> .libs/Zeroconf.o .libs/fncmp.o .libs/fnmatch.o .libs/getdate.o
> .libs/getmode.o .libs/md5.o .libs/timegm.o .libs/DirectoryAccess.o
> .libs/DnsApi.o .libs/FileAccess.o .libs/HttpSocket.o
> .libs/LibraryAccess.o .libs/RunFile.o .libs/SocketIO.o
> .libs/SSPIHandler.o -Wl,--whole-archive ../libltdl/.libs/libltdlc.a
> -Wl,--no-whole-archive  -Wl,--rpath
> -Wl,/root/new/cvsnt-2.5.03.2382/mdnsclient/.libs -Wl,--rpath
> -Wl,/usr/local/lib -L//usr/local/lib /usr/lib/libexpat.so
> ../mdnsclient/.libs/libmdnsclient.so -ldl -lcrypt
> -L/usr/lib/gcc/x86_64-redhat-linux/4.1.1
> -L/usr/lib/gcc/x86_64-redhat-linux/4.1.1/../../../../lib64
> -L/lib/../lib64 -L/usr/lib/../lib64 -lstdc++ -lm -lc -lgcc_s
> /usr/lib/gcc/x86_64-redhat-linux/4.1.1/crtendS.o
> /usr/lib/gcc/x86_64-redhat-linux/4.1.1/../../../../lib64/crtn.o
> -Wl,-soname -Wl,libcvsapi-2.5.03.2382.so -o
> .libs/libcvsapi-2.5.03.2382.so
> /usr/lib/libexpat.so: could not read symbols: File in wrong format
> 
> 
> Any ideas?
> 
> Thanks,
> Nitzan
> 
> _______________________________________________
> cvsnt mailing list
> cvsnt at cvsnt.org
> http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt
>