[cvsnt] setting Igloo with sspi protocol

[Warren, Erik]

Greetings,

I stand corrected, I tried to get igloo working with the cvs.exe from CVSNT but couldn't figure out how to tell igloo where to look for cvs.exe or where to locate the desired cvs.exe relative to igloo.  Apparently you figured out how to do it.

BTW, I emailed jalindi via the mailbox posted on their igloo download site and got no response regarding this very subject.  Pushok answers email almost always within the same day and in my experience usually within the hour.   

Erik W. Warren
Sr. Engineer - Flt. Ops. Engineering
Delta Air Lines
Dept. 088
P.O. Box 20706
Atlanta, GA 30320-6001
Ph (404) 715-7229
fax (404) 715-7202
erik.warren at delta.com



-----Original Message-----
From: Yang, Judy Bin [mailto:jyang at atsautomation.com]
Sent: Wednesday, September 17, 2003 3:20 PM
To: 'John Peacock'
Cc: cvsnt at cvsnt.org
Subject: RE: [cvsnt] setting Igloo with sspi protocol


Then would you let me know how to make Igloo work using sspi ? PLEASE.


-----Original Message-----
From: John Peacock [mailto:jpeacock at rowman.com] 
Sent: Wednesday, September 17, 2003 2:16 PM
To: Warren, Erik
Cc: Yang, Judy Bin; cvsnt at cvsnt.org
Subject: Re: [cvsnt] setting Igloo with sspi protocol

Warren, Erik wrote:

> 
> I believe that the igloo plugin can only use the protocols that were
around when it was created.  We were using igloo with pserver protocol but
now we use cvsproxy which allows sspi.  Cvs proxy available at
www.pushok.com
> 

The Igloo beta DLL uses the command line CVS that you give it, so Igloo
supports 
whatever is supported by the underlying CVS.  I have been using sspi with
Igloo 
since last year.

John

p.s. I am currently testing CVSProxy as well

_______________________________________________
cvsnt mailing list
cvsnt at cvsnt.org
http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt